Medical

Medical Mattress Air Pressure Adjustment


Install tilt sensor switches on medical mattresses to detect if the air pressure has adjusted the mattress to the right position by the change of ON/OFF signals sent by the tilt sensor. Make sure the users are at the most comfortable position. Angles option of tilt sensor: 15°, 20°, 30°, 45°, 65°
Video

Recommend Model
OncQue RBS070410 45°Tilt Detecting within a 360° radius Sensor Switch Operating Angle: 45° Switch State: DIP Normal Close Suitable for vertical PCB Dimension: 6.5*6.5*8.5 mm

OncQue RBS200100 45° Tilt Detecting for 4 directions in Vertical mode Sensor Switch
Operating Angle:45° Switch State: DIP Normal Close Suitable for Vertical PCB Dimension:9.58*4.5*4.5mm


OncQue RBS380100Photoelectric45° within a 360° radius Sensor Switch
Operating Angle:45° within a 360° radius Type: DIP Suitable for Vertical PCB Dimension: 8*10.5*12mm

Smart Crutches Falling Down Detection


Install a tilt sensor on crutches and connects with IoT, tilt sensor will change ON/OFF signal when users fall down by accident and send alarm system.
Recommend Model
OncQue RBS07031045°Tilt Detecting in Horizontal modeSensor Switch
Operating Angle: 45° Switch State: DIP Normal Close Suitable for Horizontal PCB Dimension: 6.5*6.5*8.5 mm

OncQue RBS070410 45°Tilt Detecting in Vertical modeSensor Switch
Operating Angle: 45° Switch State: DIPNormal Close Suitable for Vertical PCB Dimension:6.5*6.5*8.5 mm