Tilt Counter Module

TCM010100 Tilt Counter Module

Feature

• To record accumulated time while tilting and give warnings. When the module tilts, the inner time counter will record accumulated time and shows different colors of LED as a warning.
• Twinkling green light means the accumulated time is still in a restricted total lifetime.
• Twinkling yellow light means the accumulated time has reached warning time.
• Twinkling red light means the accumulated time has over a restricted total lifetime.
• Reset the setting of accumulated times of the counter by pressing ‘RESET’ button. Green light will be flashing at the same time.
• The module has standby function to extend the battery life.  It will be turned to sleep mode when the module is stationary.

Electrical Characteristic

Absolute Maximum Rating（Ta=25℃）

The module could be applied on filter kettles or other applications which need time counting while tilting. Below instructions are for filter kettles as an example.

1. The module could record accumulated time, the inner time counter will record tilting time and accumulated during each tilt (from flat status becomes tilt status). Below corresponding light will be flashing six times.

• Twinkling green light means the accumulated time is still in a restricted total lifetime.
• Twinkling yellow light means the accumulated time has reached warning time.
• Twinkling red light means the accumulated time has over a restricted total lifetime.

2. By pressing the ‘RESET’ button, the module will be reset.  The inner time counter will be return to zero and the green, yellow, red LED will be light up at the same time.  After, green LED will be twinkling six times.

3. Must go through the ‘RESET’ process each time after changing the filter element in order to ensure the module has recalculated.

4. The module has standby function to extend the battery life.  It will be turned to sleep mode when the module is stationary, and automatically wake-up when tilt or conducting ‘RESET’ process.

5. The module uses lithium batteries.  The inner time counter will be reset after changing batteries. (Equivalent to ‘RESET’ process)

• Please do not exceed the rated load as there will be a risk of disabling the product function.
• In the circuit, the “RBS switch” should not be near the magnetic component (for example: transformers, etc.).
• For the continued product improvement as one of the company policy, specifications may change or update without notice. The latest information can be obtained through our sales offices. Normally, all products are supplied under our standard conditions.

Filter kettle time counter.

Other applications which need time counting while tilting.