Counting Number of Times for Filter Cartridge


Install a tilt sensor switch on a filter cartridge module to count the number of using times by the change of ON/OFF signal when pouring water.  Through this, filter cartridges will be used more reasonably and effectively by counting number of using times rather than time countdown.


  Recommend Model


OncQue RBS320103 Optical One Way Tilt Switch


  • Operating Angle: 30°
  • Type: DIP
  • Suitable for Horizontal PCB
  • Dimension: 8*6*8 mm




OncQue RBS210403 SMD 15° Tilt detecting in One Axis Sensor Switch


  • Operating Angle: <20°
  • Switch State: SMD Normal Close
  • Suitable for Horizontal PCB
  • Dimension: 4*4*7.5 mm




OncQue RBS020902 SMD Tilt Angle detecting Sensor Switch


  • Operating Angle: <20°
  • Switch State: SMD Normal Open
  • Suitable for Horizontal PCB
  • Dimension: Ø3*7.8 mm




OncQue TCM010100 Tilt Counter Module


The module could record accumulated time, the inner time counter will record tilting time and accumulated during each tilt .

  • Twinkling green light means the accumulated time is still in a restricted total lifetime.
  • Twinkling yellow light means the accumulated time has reached warning time.
  • Twinkling red light means the accumulated time has over a restricted total lifetime.