Vibration detection Module Sensor

VSM010100 Vibration detection Module Sensor

Vibration Strength and Pin Output Logic Signal

To detect vibration or earthquake with a magnitude above 3 or 4, the alarm light will be light up accordingly. 

• Green LED shows an earthquake with a magnitude above 3

        When module detect the vibration strength reach a magnitude of 3, the green LED will be turned on with LV3 High signal. On the contrary, green LED         will not be turned on with LV3 Low signal.

• Red LED shows an earthquake with a magnitude above 4

        When module detect the vibration strength reach a magnitude of 4, the red LED will be turned on with LV4 High signal. On the contrary, red LED will not         be turned on with LV4 Low signal.

Absolute Maximum Rating（Ta=25℃）

Feature

To detect vibration or earthquake with a magnitude above 3 or 4, the alarm light will be light up accordingly. When earthquake or vibration occurs, the module will calculate the strength. Once reached the magnitude above 3 or 4, the corresponded pin will output signal and the alarm light will be turned on for a while.

• Green light: an earthquake with a magnitude above 3
• Red light: an earthquake with a magnitude above 4

• Please do not exceed the rated load as there will be a risk of disabling the product function.
• In the circuit, the “RBS switch” should not be near the magnetic component (for example: transformers, etc.).
• For the continued product improvement as one of the company policy, specifications may change or update without notice. The latest information can be obtained through our sales offices. Normally, all products are supplied under our standard conditions.

• Devices or applications which need vibration or earthquake detection