SMD installation Sensitive Vibration Sensor
● Function: Omni-directional Vibration detecting
● Model: VBS030600
● Certification: RoHS,REACH,Patent
● Original Place: Taiwan
● 100% Inspection with High Quality
● **Not sold in the USA
Please select which you want to ask the following product specifications：
VBS030600 Vibration Sensor
- Contacting Rate: 10 mA, 5 VDC
- Insulation Resistance: 1000 MΩ min. at 100 VDC
- Dielectric Strength: 500 VDC min. for 1 minute
- Capacitance: 5 pF max.
- IR Reflow:Peak temp.=255°C~260°C
Operating Temperature: -25°C ~ 85°C
- Storage Temperature: -40°C ~ 85°C
- Humidity: 40°C / 95%RH
- Mechanical Life: 2HZ,horizontal 1,000,000 times
- Electrical Life: 100,000 times
Input Current (mA)
Operating Voltage (V)
Function of VBS030600 Vibration Sensor: Omni-directional Vibration detecting
The VBS0306 acts like a normally closed switch which chatters open and closed as it is tilted or vibrated. Note that the VBS0306 is not guaranteed to be closed --- occasionally the sensing mechanism may remain open when at rest. The engineer should design his or her software to look for high-to-low and low-to-high edge transitions rather than an open or closed state of the switch.
- Tiny size, suitable for small space.
Wing-shaped terminals, half body of the sensor switch can be buried into PCB to save required room for installation.
- Gold-plated ball and terminals, low possibility of oxidization.
Housing made of high insulation plastic material, free from electric conduction and rust problem.
All plastic materials subject to industrial purpose, resist high temperature and meet fireproof function.
- Simple ON and OFF signals, easy for design.
- RoHS compliance, an ideal substitute for mercury switch.
- A more economical vibration detection option than IC design solution.
- All made in Taiwan and examined before shipment.
- Do not try to clean the switch with a solvent or similar substance after the soldering process.
- Suggestion for usage: For vibration usage or application, we suggest to add hysteresis for IC; if vibration is heavy, optical type of sensor switch is recommended.
- For the continued product improvement as one of the company policy, specifications may change or update without notice. The latest information can be obtained through our sales offices. Normally, all products are supplied under our standard conditions.
- This model is not sold in the USA.
As for the Roll Ball Switches, a tiny ball in the switch rolls when motion is detected, triggering a contact of metal terminals. This will generate the conductive or non-conductive status.They provide accurate control for a wide variety of applications like any angle change detecting or vibration detecting and so on.
Case of Omni directional Vibration Sensor
Function: Intrusion detection for Windows / Doors